(844) 896-6313
Epson ET-7700 Printer Support | Epson ET-7700 Unboxing Setup

Epson ET-7700 Support

  • The Epson ET 7700 printer is suitable for print, copy, and scanning.
  • It provides revolutionary cartridge-free printing.
  • Its ISO print speed is 13 ppm for black and 8.0 ppm for color prints.
  • The print resolution is 5760 x 1440 optimised dpi.
  • It has supersized and easy-to-fill ink tanks.

Loading papers in Epson Eco tank ET-7700 printer

The basic instructions for loading a set of papers in the Epson ET 7700 printer are:

  • Make sure the Epson ET 7700 printer has no problem.
  • Access the paper tray of the Epson printer.
  • Check and confirm the paper tray doesn’t have any problem.
  • Now, clean the paper tray properly.
  • Make sure the paper tray has no paper jams.
  • Get a bunch of sheets suitable for the printer.
  • Ensure the bunch of sheets has no blank paper.
  • Keep the bunch of sheets properly on the paper tray.
  • Make sure the papers are accurately aligned on the tray.
  • Close the printer paper feeder tray.
  • Move on to the control panel of the ET printer.
  • Modify the paper settings as per the requirements and take a print.

Epson EcoTank ET-7700 printing is slow

If the Epson Eco Tank 7700 printer is printing slowly, then solve it using the below procedure:

  • To start with, stop the printing tasks.
  • Now, wait for the Epson ET 7700 printer gets back to its normal state.
  • Close the documents, as well as files, which are open.
  • Check the document you need to print and ensure they are faultless.
  • If the documents have high-resolution documents, remove them.
  • Activate the given option- “Bidirectional and high-speed printing”.
  • Then, power up the computer.
  • Go to the System Preferences section.
  • Click- Printers and Scanners and activate- Options & Suppliers.
  • Remove the check mark from the high-speed printing cartridges.
  • After that, access any document on the computer and select- File.
  • Click- Print, modify the print settings as per the needs, and print.

Note: Disabling the “Bidirectional & high-speed printing” option is necessary. This is because it can move the printer print head in every direction, which results in slowing down the printer’s printing speed.

Epson ET-7700 Unboxing setup

Unboxing the Epson ET 7700 printer is not a difficult process. It starts with opening the printer pack and finishes with printing a file. The simple method for unboxing Epson ET 7700 printer is:

  • Take and keep the printer box in a safe place.
  • Open the box and take the Epson ET 7700 printer out.
  • Place the ET printer on a plain surface.
  • Tear off the covering materials from the outer side of the ET printer.
  • Then, tear off the coverings from the printer’s inner side.
  • Open the Epson ET-7700 printer paper tray and remove the coverings from it.
  • Place a bunch of sheets on the paper tray with the correct alignment.
  • Close the paper tray and ensure the printer does not have coverings.
  • Access the cartridge slots and remove their packing materials.
  • Tear off the coverings from the new printer ink cartridges.
  • Load the new cartridges into the cartridge slots and close the slots.
  • Connect the Epson printer and power socket with a stable USB cord.
  • Activate the power socket and Epson ET 7700 printer.
  • Lastly, take a test print with the Epson printer.

Epson ET-7700 Printer guidelines

The general guidelines to follow for using the Epson ET 7700 printer are:

  • Check and ensure the ET printer does not have covering materials.
  • Ensure the ET 7700 printer is not near the micro-oven or heat-producing items.
  • Then, check and confirm the printer is not reachable for children.
  • Ensure the position of the printer is not in direct sunlight.
  • Keep the Epson ET 7700 printer on a flat surface.
  • Check and ensure the printer is near the wall outlet.

Wi-Fi setup in Epson ET-7700 printer

The basic instructions to set up a wifi network in the Epson ET 7700 printer are:

  • Switch ON the Windows or Mac device connected to the Epson printer.
  • Then, make sure the wifi router has no problem and power it up.
  • Ensure the computer, printer, and wifi router has the same wifi.
  • Take a new USB cable and tear off its packing materials.
  • Connect the USB cable’s one end to the ET printer.
  • Then, connect the USB cable’s other end to the electric port.
  • Activate the electric port and Epson ET 7700 printer.
  • Check the version of the computer OS.
  • Make sure the installed Epson ET 7700 driver is of the latest version.
  • If the ET printer driver is not the latest version, remove it.
  • Save the Epson ET 7700 driver compatible with the OS version.
  • Open the driver setup file and carry on with the wizard steps.
  • Choose the network setup mode and finish the process.