(800) 874-8552
Epson ET-2850 Printer Support - www.epson.com/support/et2850

Epson ET 2850 Support

  • The Epson ET 2850 printer is suitable for printing, scanning, and copying.
  • It has a print resolution of 4800 x 1200 dpi.
  • The printer delivers printing at a maximum print size of 8.5 x 47.2”.
  • It has an auto 2-sided printing feature and an input tray with the capacity to manage 100 sheets.
  • The printer supports printing from tablets and smartphones.
  • It is compatible with Wi-Fi and a USB connectivity setup.
  • The printer delivers black prints at a speed of 10.5 ppm and color prints at a speed of 5 ppm.

Loading Papers in the Epson Eco Tank ET 2850 Printer

Loading suitable papers in the Epson ET 2850 printer is not a difficult task. The standard www.epson.com/support/et2850 instructions for this process are:

  • Move on to the Epson ET printer paper tray and open it.
  • Check and ensure the paper tray has no problem.
  • Take a bunch of sheets compatible with the ET printer.
  • Place the bunch of sheets on the paper tray properly.
  • Then, align the sheets on the Epson printer paper tray.
  • Close the paper tray.
  • Adjust the paper type and size via the printer control panel.
  • The Epson Eco Tank 2850 printer manages 100 sheets in its input tray.

Epson ET 2850 Printing is Slow

Is your Epson printer is printing slowly? If yes, then fix the problem using the www.epson.com/support/et2850 method given below:

  • To begin with, stop the print tasks.
  • Check the printer software installed on the computer.
  • Ensure the installed Epson ET 2850 printer software is of the upgraded version.
  • Now, check the printing quality for images is set as high-quality.
  • If the printing quality is high, change it to low resolution.
  • Make sure that the power cable connected to the ET printer is stable.
  • Then, increase the computer RAM performance.
  • Check and ensure the printer settings are correct.

Epson ET 2850 Unboxing Setup

The simple www.epson.com/support/et2850 procedure for unboxing the Epson ET 2850 printer is:

  • Take the Epson ET printer package.
  • Keep the printer properly in a safe place.
  • Open the package and take out the Epson printer.
  • Keep the Epson ET 2850 printer close to the electric outlet.
  • Tear off the covering materials from the outer side of the ET printer.
  • Then, tear off the inner side packing materials from the printer.
  • Check the printer properly and remove the unwanted papers if any.
  • Finally, ensure that the printer is faultless.

Epson ET 2850 Printer Guidelines

The standard www.epson.com/support/et2850 guidelines for Epson ET 2850 printer are:

  • Ensure that your Epson printer has no problem.
  • Then, make sure that the ink cartridges have no faults.
  • Check the paper tray and confirm it is perfect.
  • Make sure that the printer is not near a micro oven or opened window.
  • Keep the Epson Eco Tank printer away from the children.
  • Ensure that the printer is not in the sunlight, water, and heat.
  • Always keep the printer close to the electric port.
  • Don’t leave the printer idle.

Wi-Fi Setup in Epson ET 2850 Printer

Setting up the wireless network on the Epson ET 2850 Wireless printer is a simple process. The set of www.epson.com/support/et2850 procedures for setting up the Wi-Fi network without any hassle is:

  • Firstly, place the wireless router near the Epson printer and computer.
  • Take a power cable and connect its one end to the wall port.
  • Then, connect the other end of the power cable to the Epson printer.
  • Activate the wall port and Epson ET 2850 printer.
  • After that, activate the computer you would like to connect to the printer.
  • Search for the Epson ET 2850 printer software compatible with the computer OS.
  • Once you find the printer software, download it on the computer.
  • Run the printer software file and proceed with the on-screen www.epson.com/support/et2850 steps.
  • Choose the wireless mode to connect the ET printer and computer.
  • Finish the Epson ET-2850 Driver software installation and open the printer paper tray.
  • Place a set of suitable papers into the paper tray and close the tray.
  • Insert the new and suitable ink cartridges into the cartridge slots of the printer.
  • Finally, take a print as a sample.