Epson WF-2850 Printer Troubleshooting

• Turn on the desktop and select the Devices and Printers on the search tab.
• Where you need to select the WF-2850 printer from the list by right-clicking to it.
• Then, choose the active printer status and attempt the boot procedure.
• Inspect for the new version of the active system.
• Ensure by trial print using the WF-2850 online mode by sorting out the Epson WF-2850 offline issue.

• Start, using the power button on the Epson WF-2850 printer and get near the rear side.
• Then, you need to press and hold the reset button and bring the WF-2850 printer to the active state.
• Or else you will be warned by printer message until you reset the printer.
• Select the reboot option on the WF-2850 printer and the system. Include the desired WF-2850 printer in the system.
• Assign the print job to ensure printer activeness.

• Keep the desired WF-2850 printer to the network coverage area about the router’s support.
• Verify whether the wireless router and printer’s network are sturdy and active.
• Perform reboot procedure on the wireless router and register using the WF-2850 printer.
• Do the wireless test report to ensure network stability and access.

To establish the print job using the problem-free network. Now, you have solved the issue.

• Access and open the ink cartridge door and suspect any empty ink cartridges.
• Try to replace or refill using the Epson genuine cartridges, by removing the empty or old ones.
• Remove the printer’s print head nozzle carefully and check for any visible clogs.
• Clear out the print heads and ensure adequate paper sheets.
• Now, select the print option to make sure the WF-2850 printer whether printing or not. Now, the Epson WF-2850 won’t be printing issue is solved.

• Switch on the printer and connect via the firmware section.
• Open the desktop settings and check whether the system consists of any corrupted driver.
• Attempt to uninstall the corrupted driver file and surf using the epson.com/support/wf2850
• Link through the WF printer and look for the desired WF-2850 printer.
• Finally, complete the Epson WF-2850 driver installation setup on the system.

Still, if your Epson WF-2850 driver is unavailable, contact our team.

• Try to open the input paper tray and inspect for any paper jam issues.
• Uninstall the running print head and try to clean it without disturbing its contact area.
• Try to remove all the excess paper sheets in the tray and stack Epson’s recommended quality printing sheets.
• Verify whether the printer setup contains genuine ink cartridges and an Epson WF-2850 driver.
• Select the print option and do the test print.