(800) 874-8552
Epson firmware update problem | Epson printer firmware reset

Solution for Epson printer firmware reset

Epson Firmware reset is the essential part of printer access when it has any trouble while operating print work. Use the below steps and sort out the Epson Printer firmware reset issues in no time.

Want the right way to reset the Epson printer firmware? if you are highly tied to facing Epson firmware update problem:

  1. Initially, Turn OFF the printer and disconnect the power cable from the printer & connect it again.
  2. Switch ON the respective printer and press & hold the Resume button for at least a few seconds.
  3. Now, you can see the attention light glows.
  4. Further, it’s time to release the Resume button.
  5. Finally, you can notice the Attention and ready lights cycle during the process of the printer restoring the factory defaults.

How to restore the product after the Epson printer cartridge is reset?

Once the Epson printer cartridge reset issue happens, utilize the given steps to overcome it:

  1. To begin with, press the home buttonand hit the Setup button.Further, scroll below and select the System administration option.
  2. On the resultant page, specify the proper administrator password.
  3. Navigate down and pick the Restore default settings option.
  4. Connect through the next screen to choose the suitable options as per your preference.
  5. Just select the YESoption to reset the marked Settings option.


How long does a printer firmware update take?

The firmware updates usually take 10 to 30 minutes in general. Whereas, it completely depends upon the internet connection. Make sure when you use the printer every day, the firmware may have already been updated without your knowledge of yours. Hardly, it takes around half an hour to process the update on the firmware, and you are left free to get the software.

How do I manually reset my Epson printer?

For the Manual Epson printer reset, you need to turn OFF the respective printer. Press & hold the reset button which is present at the backside of the printer. Now, switch ON the printer by holding the reset button. After this, wait until you see the message signifying the printer is reset.

How do I revert the firmware on my Epson printer?

If your printer is turned OFF, try to press & hold the home, power, and navigation left arrow, and tap the cancel buttons at the same time. This can be done using the ROM menu that appears on the Printer’s display. Ensure with the printer setup by pressing and holding the power, down arrow along with the left arrow and hit the cancel buttons instantly.

How do I reset my Epson printer?

To start this reset procedure, you need to turn OFF the printer and you have to tap & hold the reset button on the backside of the printer. Next, you need to turn ON the printer while holding the reset button. Wait until you see the message prints that show printer reset status. Finally, you have done with the Epson printer reset procedure.