Epson ET-4850 Printer Troubleshooting

• First, you need to turn on the system and type the Devices and Printers on the search tab.
• On the next step, choose the ET-4850 printer from the available list and right-click to it.
• Hit the Set the printer online. Then, try to boot the printer to operate newly.
• Verify whether the system consists of its latest software and add the printer to it.
• Attempt the sample print using the ET-4850 online mode by restoring the Epson ET-4850 offline issue.

• To start with, turn on the Epson ET-4850 printer and start with the rear side.
• Then, you need to press and hold the reset button and enable the desired Epson ET-4850 printer.
• You will get the print alert until you complete the reset procedure.
• Further, proceed with the reboot procedure on the ET-4850 printer and the system device. Link the ET-4850 printer to the compatible system.
• Attempt the trial print work using the print option to confirm the printer’s active status.

• Put the Epson ET-4850 printer to the network coverage area with reference to the connected wireless router function.
• Verify whether the wireless router and printer network are under stable network access.
• Attempt to reboot the wireless router and add the Epson ET-4850 printer.
• Try to get the wireless test report to ensure active wireless connectivity.
• Do the sample print work to confirm & check the network stability. Finally, the issue is clarified on-Epson ET-4850 not connect to Wi-Fi.

• Slowly open the ink cartridge door and inspect the ink carriage is full or not to be replaced.
• If empty cartridges are present, remove the ink cartridges and insert the new Epson genuine-quality cartridges.
• Do the print head nozzle of the ink cartridges and inspect for any visible clogs.
• With reference to the report of the print heads, clear the clogs.
• Load the quality paper sheets and ensure with sample prints on ET-4850 printer. Finally, the Epson ET-4850 won’t be printing issue resolved.

• Initially, switch on the respective Epson printer and click on the firmware section.
• Inspect whether the installed driver is under corrupted or outdated state/status.
• Then, try uninstalling the corrupted driver file and go to com/support/et4850.
• Select the ET-4850 printer and search for the desired driver file.
• Finally, the Epson ET-4850 driver installation setup is done on the system.

till, if your Epson ET-4850 driver is unavailable, contact our team.

• Initially, open the paper tray and check whether it has any paper jam issues.
• Do open the print head and clean it using the soft cloth and wipes to install it again.
• If the input tray consists of paper sheets to it, remove them. Then, try to add Epson’s recommended quality printing sheets and close the access door.
• Suspect for the ink cartridges whether it has genuine ink cartridges and Epson ET-4850 driver or not.
• Once you confirm all the printer requirements, use the print option and do the sample print.